10 Top 3D Printing Beginner Tips From The Experts

Honestly, 3D printing can be quite tricky. Home 3D printing is even trickier as it is still immature and beginners who are just starting out do tend to face a multitude of challenges when it comes to getting reliable 3D print results.

A bit of guidance won’t hurt and that’s why we bring you the best advice on it from the experts.

  1. Recognize the fact that 3D printing at home is not for everyone.

Understanding how it works is important but equally important is to understand the fact 3D printing is a tricky job and you have to be patient and inventive at the same time.

  1. Bad printer, bad result!

Some 3D printers are not properly tuned. Check that the pulleys or belts are not loose, the printing bed is level, everything is square and is clean. Do not print with a badly calibrated printer.

  1. Knowing how to diagnose the printer will give the best results.

These machines are complex and focusing too much on a single issue would not be the solution. For example, a slipping filament could be caused by a bad hobbed bolt or driving system or an obstructed nozzle or a wrong feed value or too low or high temperature or a combination of all these. So, do not expect it to get better if you have solved one issue, the issue could be multiple for all as you know it.

  1. Print out lots of 20mm cubes.

It can be quite boring but when you first get the 3D printer up and running print these solids to test that you have a good setup and calibrated machine.

  1. Get comfortable with a nozzle to print bed adjustment.

Not many people spend time on the obvious thing, but it is highly important for successful 3d printing.

  1. One thing at a time.

Don’t try and print too many discrete objects at once. When designing a model from scratch, test-print the tricky parts first.

  1. Know your printer well.

Test out all the different settings, try printing different shapes, so you start to understand your printer.

  1. Ask the community for help.

Join online 3D print communities to know more about 3D printing. This will save you a lot of time.

  1. Choose a printer with quality support.

Go for a 3D printer that has good support available from the manufacturer. Prefer to go with your local supplier so if you need help you can easily access it at the local level and that too within real-time.

  1. Try, try and try.

Do not give up. With 3D printing, you can make almost any design printable so the key is never to give up but keep trying till you succeed.

We are 3D Printer Manufacturer and create the best quality 3D Printers at the best price.

Leave a Reply

Your email address will not be published. Required fields are marked *

WhatsApp WhatsApp us